BPMHW - EUTECROD 1804

  • MSDS: BPMHW
  • Manufacturer: EUTECTIC CORP
  • Product Name: EUTECROD 1804
  • National Stock Number: 3439-00-903-9259
Product Identification

Product ID:EUTECROD 1804
MSDS Date:05/01/1986
FSC:3439
NIIN:00-903-9259
MSDS Number: BPMHW

Responsible Party
EUTECTIC CORP
40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000;312-932-1210

Cage: 72271

Contractor
EUTECTIC CORP
CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

Ingredients

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME/1 DUST

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PHOSPHOROUS (YELLOW) (SARA III)

CAS: 7723-14-0

RTECS: TH3500000

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TO NEXT LIGHTER SHADE WHICH GIVES SUFF VIEW OF

RTECS: 9999999ZZ


APRONS, HATS, SHOULDER PROT, AS WELL AS DARK

RTECS: 9999999ZZ


AND TO INSULATE HIMSELF FROM WORK AND GROUND.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) OVEREXPOSURE TO WELDING FUMES
MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA, OR DRYNESS OR
IRRIT OF NOSE,THROAT, OR EYES. COPPER: METAL FUME FEVER CAN BE
CAUSED BY FRESH COPPER OXIDE FUME . SILVER: SALTS OF SILVER ARE
CORROSIVE. (CHRONIC) MAY LEAD TO SIDEROSIS (IRON DEPOSITS IN LUNGS)
AND (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: MAY AFFECT PULMONARY FUNCTIONS.
COPPER: NO ADVERSE LONG TERM EFFECTS DUE TO COPPER AND COPPER OXIDE
HAVE BEEN REPORTED IN LITERATURE. SILVER: SILVER AND SILVER
COMPOUNDS STAIN SKIN, EYES AND RESPIRATORY TRACT. ARC RAYS CAN
INJUREEYES AND BURN SKIN. ELECTRIC SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:REMOVE TO WELL-VENTILATED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST-AID TECHNIQUES RECOMMENDED BY AMERICAN RED CROSS. INHALATION:
REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE ARTIFICIAL
RESPIRATION/OX YGEN) . INGESTION: CALL MD IMMEDIATELY . SKIN: FLUSH
WITH COPIOUS AMOUNTS OF WATER. CALL MD . EYE: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES .

Fire Fighting

Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS AND BRAZING FLAMES
CAN IGNITE COMBUSTIBLES AND FLAMMABLES.

Accidental Release

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:READ AND UNDERSTAND MFR'S INSTRUCTIONS AND
PRECAUTIONARY LABEL ON PRODUCT.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED EXPOSURE LIM IT.
Ventilation:USE ENOUGH GEN VENT AND LOC EXHST AT ARC/BOTH, TO KEEP
FUMES/GASES FROM WORKER'S BREATHING ZONE & GEN AREA. (SUPDAT)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:HELMET/FULL LGTH FACESHLD (SUPDAT)
Other Protective Equipment:WEAR HAND, HEAD, & BODY PROT WHICH HELP PVNT
INJ FROM RADIA, SPARKS & ELEC SHOCK. AT MIN, THIS INCL ARM PROT,
(ING 5)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS: IN ING SEC. GASEOUS RXN PRODS MAY INCL CO & CO*2.
OZONE & NITROGEN OXIDES MAY BE FORMED BY RADIA FROM ARC. VENT:
TRAIN WELDER TO KEEP HIS HEAD OUT OF FUMES.EYE PROT: W/FILTER LENS.
P ROVIDE PROT SCREENS & GOG, IF NEC, TO SHIELD OTHERS. AS RULE,
START W/SHADE TOO DARK TO SEE WELD ZONE. THEN GO (ING 4)

Chemical Properties

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FLUORIDES, COMPLEX OXIDES OF IRON,
MANGANESE, SILICON, CHROMIUM, NICKEL, MOLYBDENUM, COPPER/OTHER
METALS LISTED (SUPDAT)

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE AN D LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.